CarPro ReTyre: Tire & Rubber Cleaner

FULLY clean your tyres with ease!
CarPro ReTyre was designed from the ground up specifically for the easy cleansing of tyres from accumulated tyre dressings, road film, and browning antioxidants. ReTyre from CarPro provides a sparkling clean new tyre look and prepares the surface to applyBlackOut, PERL or your favourite tyre sealant. Tyre sealants, coatings, and dressings respond much better to a perfectly clean tyre and in the case of CQuartz BlackOut, it is absolutely imperative for a full band!

The high potential hydrogen chemistry of CarPro ReTyre, combined with its foaming design and agitation pulls the contamination out of the pores of the rubber for a deep clean like never before! While the high pH makes easy work of stripping stubborn filth, the foaming action allows much greater control over the solution, allowing you to keep ReTyre where you want and keep it off of any sensitive surfaces you wish to avoid. This professional strength formula makes easy work of a tough job. Buy yours today!

Features:

• Removes browning, dressings, and road grime.
• Restores the new look of tyres and rubber.
• The foaming formula for easy cleaning and control of dripping.
• pH 12~14.

Directions:

• Rinse the tire well.
• Spray ReTyre generously onto the rubber, let it foam and dwell for 30 seconds.
• Spray onto a medium-hard brush and agitate.
• Rinse the rubber and the brush thoroughly.
• Repeat until the suds on the rubber are white.
• After fully dried, protect tyres with CarPro PERLor CQuartz BlackOut

Precautions:

• Do not let the product dry on wheels or any other surface.
  Do not use it on sensitive surfaces or finishes.
  If ReTyre drips onto wheel surfaces, dilute that area with water/rinse immediately.
  Test on an inconspicuous area before use.
  Recommended eye and skin protection.
  Keep out of reach of children.
  Store in a dry cool place.

FAQS:

Q: Is this safe for all-wheel finishes and polished wheels?
A: No, it is impossible to be sure a chemical will be safe on all finishes. We can say that on a clear coat, it is safe. When used as directed on any quality OEM painted or chromed finish then it is also safe. When used in the sun or on a hot surface or mixed with another chemical, results can become unpredictable. On a matte or satin finish, caution should ALWAYS be used because you cannot polish the surface to fix it in case you cause an issue. On anodized wheels, you should absolutely NOT use this or any other strong cleaner.

Q: How does this compare to MultiX?
A: This is far superior to MultiX for cleaning tyres.

Q: Will this product affect PERL?
A: Absolutely: It will remove PERL.

Q: How does this affect BlackOut?
A: Depends on how long it is left on and if it is rubbed into the BlackOut. It is not the correct product to use on BlackOut for maintenance. Use CarPro Reset for maintenance washing on BlackOut-coated tyres unless it is near the end of their natural life and you wish to re-coat.

The post CarPro ReTyre: Tire & Rubber Cleaner -4 Litre appeared first on Ultimate Detailerz.

CARPRO WheelX Wheel Cleaner 1Litre

Elevate Your Wheel Cleaning Game with WheelX!

Introducing WheelX, the ultimate one-step wheel cleaner designed to deliver professional-grade results in record time! This powerful, fast-acting formula effortlessly breaks down dirt as well as tough contaminants like brake dust, road grime, and grease, making it your go-to solution for sparkling clean wheels.

After extensive collaboration and testing with ourselves and other industry experts, CARPRO WheelX has been perfected for maximum cleaning efficiency. With just one application, watch as dirt and grime vanish—no scrubbing necessary! This unique reactive blend is extremely effective yet safe for almost every wheel finish, including OEM, chrome, powder-coated, and CQUARTZ Coatings.

Why Choose WheelX?

• Fast-Acting Formula: Cuts through brake dust and stubborn contaminants in seconds.
• Versatile Use: Ideal for wheels, calipers, wheel wells, and undercarriages—perfect for routine maintenance or prepping for coatings.
• Safe for Most Finishes: Protects your investment with a gentle yet powerful cleaning solution suitable for most wheel types.
• Sealant Removal: Easily removes old sealants, restoring your wheels to their original glory.

Transform your wheel care routine with WheelX and experience the perfect blend of power and simplicity. Achieve a flawless shine that not only looks great but also protects your wheels—all in one easy step!

Features:

• Powerful 1-step Wheel Cleaner – Iron Remover & Cleaner in 1!
• Effortlessly Removes Dirt, Brake Dust, Oil, Grease, & More.
• Safe On OEM, Painted, Powder-coated, & Chrome Wheels.
• Safe On CQUARTZ Coatings.

Directions:

1. Use outside of sunlight and on cool surfaces only.
2. Spray WheelX generously on wheel and in wheel barrel.
3. Allow to dwell for 1~2 minutes but do NOT allow to dry on the surface.
4. If necessary or preferred then agitate with a good wheel brush
5. Rinse thoroughly.

Precautions:

1. Not for use on bare aluminum as discoloration may occur. If required, proceed with caution. In the event of discoloration, polish with Metallicut by hand or machine to restore finish.
2. Do NOT use in direct sunlight.
3. Do NOT use on hot surfaces.
4. Do NOT allow to dry on surface.
5. Rinse off in less than 5 minutes.
6. Do not mix with other chemicals.
7. Test in inconspicuous area before use elsewhere.
8. Where eye and skin protection.
9. Keep out of reach of children.
10. Store out of sunlight.

CARPRO WheelX FAQ:

• Q: How do WheelX and IronX perform differently?
• A: WheelX not only dissolves brake dust and ferrous metals but also dissolves dirt, grime, oil and more. IronX is amazing at dissolving brake dust and ferrous metal particles only.

• Q: What is the difference between WheelX and IronX?
• A: IronX is pH 7.0 (considered neutral) while WheelX has a pH 5.7 which is slightly acidic.  pH 5.7 is considered the approximate pH of clean rainwater.

• Q: Is CARPRO WheelX stronger than other wheel cleaners on the market?
• A: CARPRO WheelX removes dirt, grime, and brake dust easier than any other wheel cleaner we have tested.

• Q: Do I need to scrub my wheel with WheelX?
• A: Nope!  In fact almost everything comes off without even touching it!  Gone are the days of any effort being needed to clean wheels. While it’s always best to go over it with a light agitation, CARPRO WheelX and water pressure alone will blow your mind with the results.

• Q: Can I dilute WheelX?
• A: If you dilute it, you will reduce its strength and effectiveness.  It is made as a ready to use product.

• Q: Is WheelX safe for carbon ceramic brakes?
• A: CARPRO states WheelX is perfectly safe for carbon ceramic brakes when used as directed.

• Q: What is the pH? 
• A: pH is 5.7

• Q: Is WheelX safe on all finishes?
• A: WheelX is safe on nearly every finish when used as directed.

• Q: Is WheelX safe on raw aluminum?
• A: On raw aluminum we advise caution and that you test in an inconspicuous area.

• Q: Is WheelX safe on anodized aluminum?
• A: On anodized aluminum we always suggest to use a ph neutral soap and test in an inconspicuous area first.

The post CARPRO WheelX Wheel Cleaner 1000ml *New* appeared first on Ultimate Detailerz.

CarPro WheelX sold by Ultimate Detailerz(CarPro India), official importers of CarPro Since 2013. Buy Genuine CarPro Products from the original importers of CarPro In India

CARPRO WheelX Wheel Cleaner 500ml 

Elevate Your Wheel Cleaning Game with WheelX!

Introducing WheelX, the ultimate one-step wheel cleaner designed to deliver professional-grade results in record time! This powerful, fast-acting formula effortlessly breaks down dirt as well as tough contaminants like brake dust, road grime, and grease, making it your go-to solution for sparkling clean wheels.

After extensive collaboration and testing with ourselves and other industry experts, CARPRO WheelX has been perfected for maximum cleaning efficiency. With just one application, watch as dirt and grime vanish—no scrubbing necessary! This unique reactive blend is extremely effective yet safe for almost every wheel finish, including OEM, chrome, powder-coated, and CQUARTZ Coatings.

Why Choose WheelX?

• Fast-Acting Formula: Cuts through brake dust and stubborn contaminants in seconds.
• Versatile Use: Ideal for wheels, calipers, wheel wells, and undercarriages—perfect for routine maintenance or prepping for coatings.
• Safe for Most Finishes: Protects your investment with a gentle yet powerful cleaning solution suitable for most wheel types.
• Sealant Removal: Easily removes old sealants, restoring your wheels to their original glory.

Transform your wheel care routine with WheelX and experience the perfect blend of power and simplicity. Achieve a flawless shine that not only looks great but also protects your wheels—all in one easy step!

Features:

• Powerful 1-step Wheel Cleaner – Iron Remover & Cleaner in 1!
• Effortlessly Removes Dirt, Brake Dust, Oil, Grease, & More.
• Safe On OEM, Painted, Powder-coated, & Chrome Wheels.
• Safe On CQUARTZ Coatings.

Directions:

1. Use outside of sunlight and on cool surfaces only.
2. Spray WheelX generously on wheel and in wheel barrel.
3. Allow to dwell for 1~2 minutes but do NOT allow to dry on the surface.
4. If necessary or preferred then agitate with a good wheel brush
5. Rinse thoroughly.

Precautions:

1. Not for use on bare aluminum as discoloration may occur. If required, proceed with caution. In the event of discoloration, polish with Metallicut by hand or machine to restore finish.
2. Do NOT use in direct sunlight.
3. Do NOT use on hot surfaces.
4. Do NOT allow to dry on surface.
5. Rinse off in less than 5 minutes.
6. Do not mix with other chemicals.
7. Test in inconspicuous area before use elsewhere.
8. Where eye and skin protection.
9. Keep out of reach of children.
10. Store out of sunlight.

CARPRO WheelX FAQ:

• Q: How do WheelX and IronX perform differently?
• A: WheelX not only dissolves brake dust and ferrous metals but also dissolves dirt, grime, oil and more. IronX is amazing at dissolving brake dust and ferrous metal particles only.

• Q: What is the difference between WheelX and IronX?
• A: IronX is pH 7.0 (considered neutral) while WheelX has a pH 5.7 which is slightly acidic.  pH 5.7 is considered the approximate pH of clean rainwater.

• Q: Is CARPRO WheelX stronger than other wheel cleaners on the market?
• A: CARPRO WheelX removes dirt, grime, and brake dust easier than any other wheel cleaner we have tested.

• Q: Do I need to scrub my wheel with WheelX?
• A: Nope!  In fact almost everything comes off without even touching it!  Gone are the days of any effort being needed to clean wheels. While it’s always best to go over it with a light agitation, CARPRO WheelX and water pressure alone will blow your mind with the results.

• Q: Can I dilute WheelX?
• A: If you dilute it, you will reduce its strength and effectiveness.  It is made as a ready to use product.

• Q: Is WheelX safe for carbon ceramic brakes?
• A: CARPRO states WheelX is perfectly safe for carbon ceramic brakes when used as directed.

• Q: What is the pH? 
• A: pH is 5.7

• Q: Is WheelX safe on all finishes?
• A: WheelX is safe on nearly every finish when used as directed.

• Q: Is WheelX safe on raw aluminum?
• A: On raw aluminum we advise caution and that you test in an inconspicuous area.

• Q: Is WheelX safe on anodized aluminum?
• A: On anodized aluminum we always suggest to use a ph neutral soap and test in an inconspicuous area first.

The post CARPRO WheelX Wheel Cleaner 500ml *New* appeared first on Ultimate Detailerz.

Available in Original, Lemon Scent, and concentrated IronX Paste formulas for stubborn contaminants, IronX is the original, and still the best, acid-free iron fallout remover.

• New formula with less odour!
• Powerful iron filings & contaminants cleaner
• Dissolves iron fallout

How to use

• • Wash the surface.
  • Wash the car or wheels surfaces, and make sure the surface is in cool temp.
  • Shake well, and spray on the surface. Rub it in with a damp sponge thoroughly.
  • Wait 5 min. while contaminants change their colour to purple/red. Wipe off with a damp soft sponge. Don’t let the IronX dry completely on the surface!
  • Rinse well or power washes the whole surface. The vehicle is ready to clay now.

The post CarPro IronX, Cherry Scent appeared first on Ultimate Detailerz.

CarPro DLUX long-life trim ceramic coat was engineered specifically for coating plastics as well as rubber and metal.

This Ceramic coating is the pinnacle of Exterior Plastic protection and darkens the trim as well without leaving any slick greasy feel that washes off.

A slightly different formula from the original Cquartz, Contains more than 50% pure silica!, Silane-based glass coating quality as a main component, and organosilane. DLUX protects the coated material to form a heavy glass on top of the substrate.

DLUX has semi-permanent chemical bonding to surface pores, We use different nano compositions to bond hard to plastic surfaces and achieve a thick layer coat.

On car wheels, DLUX will repel dirt and dust making it very easy to clean brake dust. DLUX will protect from water spots as well, these will be easy to remove.

Highlights:

• Restores faded trim to look like new.
• Gloss effect and hydrophobic will last up to 1 year
• Made from quality high-grade organic silane. DLUX is a Silane-based glass coating, DLUX Contains more than 50% pure silica!
• We have incorporated a totally different nano composition to bond hard to plastic surfaces and achieve a thick uniform layer.
• Very easy to apply with great UV protection, on all exterior substrates.
• It can be used on textured or smooth plastic
• Average use for 4 wheels and plastic trim = 10-15ml.
• CQuartz DLux offers the same impenetrable protection as plastic trim, rubber, and wheels. It restores the rich look of faded plastic trim and
• keeps it dark with strong UV protection. Apply CQuartz DLux to the wheels to block out brake dust and cut your cleaning time in half.

CQuartz DLux even protects surfaces from water spots. Minerals left by water cannot penetrate this tough coating. Due to the semi-permanent nature of CQuartz DLux, it should be used on very clean, dry surfaces.

The CQuartz DLUX Kit Contains:

• 1 CQuartz DLUX 30ml.
• 1 Blue Foam Block Applicator
• 4 4×4 Suede MF applicators

The post CarPro Dlux Kit, Trim & Wheel Ceramic Coating appeared first on Ultimate Detailerz.

Safe to use on all interior and exterior plastic, rubber, vinyl, and modern leather surfaces, Perl offers sophisticated UV inhibitors and an advanced waterborne acrylic-resin system to provide superior water-repellency over conventional dressings.

• Waterborne silicone-oxide dressing
• UV and water-resistant
• Suitable for tyres, plastic rubber, vinyl, and leather trim

Perl restores the richness of color to faded materials leaving behind a matte to semi-gloss finish depending on dilution level (up to 5:1), making Perl both versatile and economical to use.

How to use it?

• Clean the surface of all dirt, oil & dust.
• Dilute Perl with water:
• External plastics – 1:3
• Engine bay – 1:1 – 1:3
• Tyres/rubber – 1:0 – 1:1
• Interior/dash/leather – 1:5
• Pour into a sprayer bottle and shake well.
• Spray over the surface.
• Wipe off with MF. You can use the CARPRO Tyre applicator for coating tyres, or a regular sponge applicator for coating rubber.

The post CarPro Perl appeared first on Ultimate Detailerz.

CQuartz BlackOut utilizes polysiloxane technology merged with an acrylic resin to create an incredibly durable protective coating for rubber, and plastic trim. The coating is far more durable than traditional tyre dressings, while it’s also 100% dry to the touch and with no sticky side effects of silicone-based products. This unique formula also inhibits the deterioration of rubber and protects it from UV rays. BlackOut even makes tyres EXTREMELY easy to clean! Dirt barely sticks to it in the first place and if washed regularly you never need more than the water to clean it to perfection.

Features & Benefits:

• Self-cleaning, hydrophobic, salt & chemical resistance.
• UV resistance.
• It preserves its black matte/satin appearance.
• No VOC.
• CarPro states an expected durability of 6 months.

Applications:

• Tires.
• Rubber.
• Plastic.

How To Use CQuartz BlackOut:

1. Wash tires thoroughly with MultiX
2. Dry very well!
3. Pour a line of BlackOut on the tyre applicator sponge.
4. Work in the coat over the tyre wall surface. (Add product as needed)
5. Let the coating dry for a bare minimum of 30 minutes.
6. To apply a second layer, repeat the steps above.

Precautions:

• Allow drying for 12 hours minimally before exposure to nasty weather.
• Avoid soaps and chemicals during the first 3 days.
• Recommended application temperature: 58°F ~ 90°F.
• Avoid the use of motorcycle tyres

FAQ:
What are the differences between BlackOut and PERL when used on tyres?
PERL is going to be the more cost-effective option. PERL is a glossier finish and BlackOut is a very matte finish. BlackOut is much more durable and also stays cleaner longer. In terms of maintenance, BlackOut is the clear winner as well.

The post CQuartz Blackout appeared first on Ultimate Detailerz.

FULLY clean your tyres with ease!
CarPro ReTyre was designed from the ground up specifically for the easy cleansing of tyres from accumulated tyre dressings, road film, and browning antioxidants. ReTyre from CarPro provides a sparkling clean new tyre look and prepares the surface to applyBlackOut, PERL or your favourite tyre sealant. Tyre sealants, coatings, and dressings respond much better to a perfectly clean tyre and in the case of CQuartz BlackOut, it is absolutely imperative for a full band!

The high potential hydrogen chemistry of CarPro ReTyre, combined with its foaming design and agitation pulls the contamination out of the pores of the rubber for a deep clean like never before! While the high pH makes easy work of stripping stubborn filth, the foaming action allows much greater control over the solution, allowing you to keep ReTyre where you want and keep it off of any sensitive surfaces you wish to avoid. This professional strength formula makes easy work of a tough job. Buy yours today!

Features:

• Removes browning, dressings, and road grime.
• Restores the new look of tyres and rubber.
• The foaming formula for easy cleaning and control of dripping.
• pH 12~14.

Directions:

• Rinse the tire well.
• Spray ReTyre generously onto the rubber, let it foam and dwell for 30 seconds.
• Spray onto a medium-hard brush and agitate.
• Rinse the rubber and the brush thoroughly.
• Repeat until the suds on the rubber are white.
• After fully dried, protect tyres with CarPro PERLor CQuartz BlackOut

Precautions:

• Do not let the product dry on wheels or any other surface.
  Do not use it on sensitive surfaces or finishes.
  If ReTyre drips onto wheel surfaces, dilute that area with water/rinse immediately.
  Test on an inconspicuous area before use.
  Recommended eye and skin protection.
  Keep out of reach of children.
  Store in a dry cool place.

FAQS:

Q: Is this safe for all-wheel finishes and polished wheels?
A: No, it is impossible to be sure a chemical will be safe on all finishes. We can say that on a clear coat, it is safe. When used as directed on any quality OEM painted or chromed finish then it is also safe. When used in the sun or on a hot surface or mixed with another chemical, results can become unpredictable. On a matte or satin finish, caution should ALWAYS be used because you cannot polish the surface to fix it in case you cause an issue. On anodized wheels, you should absolutely NOT use this or any other strong cleaner.

Q: How does this compare to MultiX?
A: This is far superior to MultiX for cleaning tyres.

Q: Will this product affect PERL?
A: Absolutely: It will remove PERL.

Q: How does this affect BlackOut?
A: Depends on how long it is left on and if it is rubbed into the BlackOut. It is not the correct product to use on BlackOut for maintenance. Use CarPro Reset for maintenance washing on BlackOut-coated tyres unless it is near the end of their natural life and you wish to re-coat.

The post CarPro ReTyre: Tire & Rubber Cleaner appeared first on Ultimate Detailerz.