• The fast effective cutting action
• Can be used by hand or by machine
• High gloss finish
• Safe on soft metals

Fast and effective, MetalliCut is the go-to metal polish for exhaust tips, chrome wheels, bumpers and trim. Create a better-than-new shine with MetalliCut and a foam polishing pad by machine or by hand!

How to Use CarPro Metallicut Metal Polish:

• Apply 6-8 drops of MetalliCut to a firm foam polishing pad.
• Spread on the surface at speeds 1-2.
• Increase speed to 4-5 to perform the cutting action until abrasives are broken down and high gloss is achieved.
• Using a clean MF towel remove buff any excess residue and repeat steps 1-3 as necessary.

Manual Application:

• Apply a small amount of MetalliCut to an MF towel or wire wool depending on the metal type.
• Using medium to firm pressure work into the metal surface until the product becomes less opaque.
• Use a clean MF to buff away any residue to a high shine.
• Repeat steps 1-3 as necessary.

The post CarPro Metallicut Metal Polish appeared first on Ultimate Detailerz.

MultiX comes in a concentrated formula capable of removing all manner of filth and soiling. As is the case with most of the CarPro line, our products function in a full circle, meaning you can use MultiX as a pre-wash cleanser, as well as at the end of the wash cycle for deep cleansing and removal of various stains on a protected surface.

• Multi-purpose cleaner
• Pleasant citrus scent
• Safe on a variety of surfaces

With its citrus scent, Multi X not only smells fantastic but offers a great deal of versatility with uses on the interior, exterior, engine bay, and more!

How to use it?

• Dilute MultiX with water. We recommend 1:20, but you can use richer ratios for heavy dirt. 1:100 is sufficient for high-pressure cleaning.
• Apply using a sponge, brush, or spray bottle.
• Rinse thoroughly.

NOTE: DO NOT USE UNDILUTED. DO NOT USE IT ON LEATHER. DO NOT USE ON BARE ALUMINIUM OR OTHER UNCOATED METALS

The post CarPro MultiX All Purpose Cleaner Concentrate appeared first on Ultimate Detailerz.

• It leaves the glass crystal clear and sparkling.
• Can be used by hand or machine.

Hand polishing pads are provided for mild water spot removal, if you want to work efficiently and widespread severe water spots or light scratches, please work with a combination of a glass polishing machine (Rotary or DA) and a buffing glass pad.

When used with an orbital buffer this polish can remove surface scratching from glass which is caused by salt and road dust that binds to your windscreen wipers.

No need to use strong dissolving agents, there is no damage to the skin by using such materials.

Features:

• It will not distort glass.
• Great for restoring old windshields.
• Can also be used to clean and brighten chrome and other metal surfaces.
• For hand or machine use.
• Not for use on aftermarket window tint, painted or coated glass.
• Great for Plexiglas polishing or headlamp restoration.
• Remove tiny pinhole pits in glass windows, and polish fine wiper scratches.

How to Use:

• Shake the bottle well
• Apply a small amount on the glass polish pad or our hand glass applicator.
• Cover the car panels properly and rubber seals with nylon film so less powder dust will spread over them.
• Buff thoroughly all over the glass surface in a circular motion.
• Rinse the surface with water. wipe off with MF, and observe your work it needs another go.

Bottle Sizes:

• 500ml. squeezer bottle.

Precautions:

• Always try a small test spot to make sure Ceriglass does not mar or scratch the surface.
• For best results, apply in the shade on cool glass.
• We recommend using a face mask while using a polishing machine to prevent inhalation of polish powder.

The post CarPro Ceriglass appeared first on Ultimate Detailerz.