CarPro India POLYSHAVE DECONTAMINATION BLOCK (USE WITH A CLEANING LUBRICANT GEL)- NEW PACKING
For professionals and enthusiasts alike the Polyshave Decontamination Block is a simple and fast method to remove contaminants from the surface of exterior automotive finishes and glass. Our Polyshave block is one of three options in our Polyshave line and is constructed to last much longer than clay. With our advanced Rubber Polymer Technology bonded to a 1 3/4″ x 2 3/4″ x 4 1/4″ backing you have excellent control over the tool and another great option from CarPro for eliminating the need for detailing clay.
Decontamination of the paint surface is critical to proper auto care for a multitude of reasons. You want to remove all contaminants before polishing so you can work on a clean canvas rather than dragging tiny contaminants across the paint during the polishing phase. Remove them first! Then polish… Utilizing any of our Polyshave products you can remove the above surface bonded contaminants and use Iron X to remove anything below the surface of the paint as well!
For years clay was THE cornerstone of vehicle decontamination but now with our Polyshave Towels, Pads, and Blocks, Iron X, TRIX, and Tar X, we offer a variety of methods to remove decontamination from the surface. Like clay, the Polyshave Decon Block removes the above surface contaminants but UNLIKE clay it is not as time-consuming. Also unlike clay if you drop any product from our Polyshave line it can be rinsed off and still used! With clay anytime, it’s dropped it becomes instant trash and must be tossed out. Our CarPro Polyshave Block not only rinses easily but also outlasts clay time and again.
Deep clean the paint and glass in less time and with less effort than a traditional clay bar. Our new advanced rubber polymer technology removes above surface paint, road grime, tar, over spray, water spots, tree sap, rail dust, and other bonded surface contaminants easily. After use, the surface will be clean, smooth, and free of all contaminants.
Features:
- Advanced Rubber Polymer Technology
- Quickly shaves away surface contaminants and leaves surface smooth to the touch
- Re-useable: Simply rinse after use and re-use time and again
- Replaces aggressive claying
- Removes contamination faster than clay
- Eliminate hand and finger fatigue
- Lasts 5 times longer than clay at a fraction of the cost
Specifications:
- Size: 81 x56 x 28 mm
- Material: Advanced Rubber Polymer Technology
- Colour: Handle Grey / Surface Side Black
Directions:
- Wash vehicle
- For first use break in PolyShave block by using on windshield or glass before paint.
- Apply A Suitable Lubricant Gel liberally and keep the surface wet with lubricant
- Do not use pressure, simply glide across the surface repeatedly
- Rinse block often
- Wipe residue off after each section
Notes:
- As with any mechanical decontamination products, polishing afterwards may be needed to remove any micro marring
- For a perfect finish use a finishing polish after use
Precaution:
- If you are new to these types of products check paint in direct lighting after one section to verify correct use.
IMAGE IS ONLY INDICATIVE- ITS NOW IN A NEW PACKING IN A PLASTIC CASE AND SMALLER
