Spotless’s proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials, and can even be used on CQUARTZ coatings, helping you keep your vehicle spot-free.
- Safely neutralizes hard water spots and stains on plastics, emblems, glass, paint and modern wheels with a clear coat.
- Essential for preparing matte paint for coating and/or maintenance.
For Bodypaint:
- Wash the vehicle with Reset, and rinse and dry the paint.
- Work indoors or in the shade on cool panels.
- Prepare 2 damp Terry Weave Towels.
- Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area.
- Allow 30 seconds to 1 minute for Spotless 2.0 to break down the minerals on the surface before wiping the affected area to help loosen the mineral deposits.
- Do not let the chemical dry on the surface, wipe off with a 2nd damp Terry Weave Towel or apply Spotless 2.0 again.
- Repeat if necessary.
- After cleaning each panel, thoroughly rinse the panel with running water and dry it before moving to the next panel.
For Emblems and Wheels:
- Clean the area with Reset, rinse and dry the surface.
- Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to the affected area 1 section at a time.
- Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains.
- Repeat if necessary.
- Rinse thoroughly with running water after cleaning each area and dry.
Textured Plastics:
- Clean the plastics with Reset, rinse and dry.
- Spray Spotless 2.0 directly on the textured plastic or apply to a damp microfiber towel and wipe it onto the surface generously to allow it to get into the pores.
- Allow Spotless 2.0 for 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores.
- Repeat if necessary.
- Rinse thoroughly with running water after cleaning each section and dry.
For Glass:
- Apply Spotless 2.0 onto effect glass with a Terry Weave Towel and allow to dwell for 30 seconds to 1 minute.
- Use the same Terry Weave Towel to polish the glass to agitate the minerals or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand.
- After spot removal thoroughly rinses the glass and adjacent panels with running water or wash with car shampoo and dry.
Tips and Tricks:
- Identify water spots by water clinging to painted surfaces such as very slow sheeting or droplets catching on the panel, wipe the surface lightly with a damp microfiber towel and look for the outline of spots (also works for glass) using indirect light.
- Always work with cool panels out of the sun and wind.
- Keep the working area small, and complete cleaning section by section
- Allow the product to dwell on the affected area without drying for maximum efficiency of breaking down the contamination
- Be careful of spray mist that may drift on to adjacent panels or glass.
